Level Sensor For Particle Matter, Powders, Viscous And Dense Materials

Our Sensors can used for level detection of powders(such as: metal powders, food powders,etc), particle matters(such

as:grain pellets, feed pellets, plastic pellets, etc), viscous and dense materials(such as: slurry, sauce, glue and honey, etc),

oil or liquid with foams.

Features:

1. Select quality materials(316 stainless steel housing, PEEK sanitary probe)

2. Pressure resistant

3. High temperature resistance(Normal pressure -40 degrees to 150 degrees environment can be used.)

4. Parameter adjustable.

5. Tapered design is easy to clean.

Main Parameter:

1. Power Supply: 12-30VDC.

2. Output Mode: NPN/PNP,PWM.

3. Logic Output: NO+NC.

4. IP Grade: IP67.

5. Materials: 316 stainless steel, PEEK probe.

6. Response Time: 0.2s

Cautions:

1. No Angle requirement for installation, and the distance between the probe and the container should be at least 5mm.

2. The working voltage range is DC12-30V. If the voltage is higher than DC30V, the sensor will be damaged. Measures

should be taken to prevent the voltage from being higher than DC30V.

3. The product is installed with G1/2 thread. Please wrap an appropriate amount of PTFE Tape or sealing tape on the

thread during installation.

4. Read the electrical connection and pin definitions carefully before wiring to avoid sensor damage caused by wrong

wiring. If encounter problems in the installation, please do not disassemble for maintenance, you can contact us to deal with.

Hot Tags: level sensor for particle matter, powders, viscous and dense materials, China level sensor for particle matter, powders, viscous and dense materials manufacturers, suppliers, factory, Super Junction Mosfet 700v, Medical Holmium Laser 30w Portable, digital display input level gauge, vehicle mounted solar inverter, Planar Pressure Sensor, single bridge strain gauge