Vehicle Mounted Solar Inverter Manual

Welcome to buy wireless remote control pure sine wave inverter, this inverter can use 433MHz wireless remote control to remotely control the opening and closing of the inverter, and has protection functions such as undervoltage, overvoltage, overtemperature, overload, and short circuit. Suitable for wind energy, photovoltaic, home energy storage and other energy industries.

Product Features

1.433MHz wireless remote control

Using TFT LCD screen display, more intuitive

High and low voltage isolation, more safety

Display voltage, current, power, power factor and various alarm information

Product Description

Product Composition

Inverter host

433MHz antenna

Remote control

Spare fuses

Remote control function

When the inverter switch is turned on, the start and stop of the inverter can be controlled by the 433MHz wireless remote controller. The ON key turns on the inverter, and the OFF key turns off the inverter. After turning on the inverter each time, it takes a few seconds for the AC output port to have output voltage.

LCD output information

Normal working state: input voltage, output voltage, output current, output power, power factor.

Alarm state: undervoltage protection, overvoltage protection, overtemperature protection, overload protection.

Protection function

When the input voltage is lower than the undervoltage protection voltage value, the undervoltage protection will be prompted, the buzzer will beep once, the LCD screen will prompt Bat Low, the inverter stops working, and the inverter needs to be restarted.

When the input voltage is higher than the overvoltage protection voltage value, overvoltage protection is prompted, the buzzer beeps twice, the LCD screen prompts Bat High, the inverter stops working, and the inverter needs to be restarted.

When the internal temperature of the inverter exceeds a certain value, it will prompt overtemperature protection, the buzzer will beep 3 times, the LCD screen will prompt Over Temp, the inverter will stop working, and the inverter needs to be restarted.

The connected load power is greater than the maximum output power of the inverter, prompting overload protection, the buzzer beeps 4 times, the LCD screen prompts Over Load, the inverter stops working, and the inverter needs to be restarted.

If there is a short circuit at the output, there is no prompt, and the inverter will stop working. When the short circuit fault is removed, the inverter will automatically resume operation.

Table 1 Undervoltage and Overvoltage Protection Voltage Values

Inverter model	Undervoltage	Overvoltage
12V Inverter	10.0V	15.8V
24V Inverter	20.0V	31V
48V Inverter	40.0V	62V

Table 2 Summary of Protection Functions

Alarm information	Buzzer prompts	LCD screen prompts	Reboot required	Self-recovery
Undervoltage	Beep 1	Bat Low	Yes	Yes
Overvoltage	Beep 2	Bat High	Yes	Yes
Overtemperature	Beep 3	Over Temp	Yes	Yes
Overload	Beep 4	Over Load	Yes	Yes
Short Circuit	No	No	No	Yes
Low Voltage Recovery Start	No	RECOVERING	Yes	Yes
High Voltage Recovery Start	No	RECOVERING	Yes	Yes

 

The following is our company Vehicle Mounted Solar Inverter product details,If you have any needs and questions, please contact us by letter or phone.

---

---

 

 

 

 

 

 

 

 

Hot Tags: vehicle mounted solar inverter, China vehicle mounted solar inverter manufacturers, suppliers, factory, Screw Tension Pressure Sensor, Sic Mosfet, vt7 electric vertical takeoff and landing fixed wing uav, ultrasonic distance sensor, digital display input level gauge, drone detection and early warning device