Reaction Torque Sensors

Mounting Type:Thread holes
Description:Flange static torque sensor
Model Number:BC200
Type:force sensor
Application: Static and non-continuous rotation torque force measurement
Series:Torque sensor

Send Inquiry

Description

Torque Sensor Information

The principle ofresistance strain, high precision, stable and reliable performanceLow range torque measurement, easy to install and use.For double flange connection.Apply to static torque measurement.

The torque sensor can be matched to many joints of the robot arm according to customer requirements, allowing multiple units to be connected to the bus to meet the needs of linkage use on the robot arm. At the same time, the transfer flange can also be installed as a test application in scientific research, industrial automation and other fields.

Torque Sensor Application:

1. Torque Sensor: Test the output torque and power of rotary power equipment such as motor, engine and internal combustion engine;
2. Torque Sensor: Detection of torque and power of fan, water pump, gear box and torque plate hand;
3. Torque Sensor: Detection of torque and power in railway locomotives, automobiles, tractors, aircraft, ships and mining machinery;

Torque Sensor Data

Technical Specification
Cap: 0-5,0~10,0-20,0-30,0~50,0~100,0-200,0-500,0-1000,0- 2000,0-3000,0~5000N.M		Material	Alloy Steel
Combined error :	0.1%FS	Zero balance :	± 2.0 %FS
Output Sensitivity:	1.5 ± 0.5mV/V	Excitation, Recommended:	9~15Vdc
Non-Linearity:	0.1%FS	Temperature effect on Span	± 0.05%FS/10℃
Hysteresis :	0.1%FS	Temperature effect on zero	± 0.05%FS/10℃
Creep(30min):	0.1%FS	Safe overload:	150%FS
Repeatability	0.1%FS	Ultimate overload:	200%FS
Response frequency:	10kHz	Input resistance:	725± 25 Ω
Cable ultimate full:	98N.m	Output resistance:	700± 5Ω
Temperature allowed	-20～+80℃	Insulation resistance:	≥ 5000MΩ @ 100 Vdc
IP Rating:	IP65	Cable:	Φ3*2m